Common Maintenance Parts
-
CLEANING ROLLER
Cleaning will help remove debris from inside the printer. This will keep it from getting on the card and causing print defects. -
CARD LOAD ROLLER
Card jams may occur if the card load roller is dirty. -
MAGNETIC HEAD
If the magnetic head is dirty, errors may occur during writing to or reading of the magnetic stripe card. Clean after approximately every 1,000 cards. -
THERMAL HEAD
Lines may appear on the card after printing if the thermal head is dirty. Clean after printing about 10,000 images.
-
CARD FEED ROLLER/HEATING ROLLER
The color of the printed card may appear faded or dirt may appear conspicuous if the card feed roller or heating roller is dirty. Perform cleaning after printing about 1,000 cards. -
BOBBIN HOLDERS
If burrs produced by friction with the bobbins are attached to the bobbin holders, they may fall onto the card, ink ribbon, or retransfer film, causing printing errors. -
FAN FILTER
The color of the printed card may appear faded or dirt may appear conspicuous if the fan filter is dirty. Perform cleaning after printing about 10,000 cards.